USB Tester 3~30V DC Voltmeter ammeter current voltage power meter capacity monitor qc2.0 quick charger Phone Power Bank detector
1. 100% Brand New and High Quality.
2. This is the mini USB meter. It can measurevoltage, current, power and capacity.
3. It can clearly display all the data. Can easily measurethe USB port and device operating current and the output voltage charge-discharge capacity, performance, and judge the performance of the charging cable charging equipment
4. This tester can meet the requirements! Fit to factories, laboratories and personal use wide range
5. Easy to use, easy to take alone, no additional power supply
6. SupportQC2.0, CompatibleQC3.0, BC1.2, Apple voltage range
7. SupportUSB double-sided plug
8. Suiable for testing PC USB, cell phone charger, car charger , mobile power , etc.
1. Model: J7-t
2. Material: Plastic
4. Voltage: 3-30V
5. Current: 0-5.1A
6. Operating temperature: -10 – 60°C
7. Size: 65 x 24 x 14mm
• This test can be a USB charging current, voltage, discharge capacity,Quantity of electric charge,power, timing, intelligent devices.
• It can be very easy to find digital device charging problem.
• Tester three dimensional size 65 * 24 * 14mm • The only button on the tester is used to view and test data switch, The tester can be powered down to save dat
1. Input Voltage: 3V – 30V
2.Input current : 0 – 5.1A
3.Cumulative capacity range: 0-99999 mah precision: 0.001 Ah
4.Charge accumulation scope: 0-999999 MWH precision: 0.001 Wh
5.Cumulative power range: 0-299.999W precision: 0.001W
6.Timing the maximum range: 0-999 hours 59 minute 59 seconds precision: 1 second
7.Parameters that you can test: Voltage of battery. Current of battery, discharge capacity of battery,Quantity of electric charge,power of battery,timing.
8.Communication function: Yes
9. Parameters adjusting function :Yes. Equipment for parameters adjustment: One electronic load,one constant current source. Voltage of constant current source should be set to 8.5V
There are 3A, 2A, 1A and 0.3A models for current adjusting.
Here is a example for 3A:
When you set electronic load at 3A model, the current will be adjusted step by step.
It will cost you about 10 seconds and you can see the result changing procedure in the LCD screen.
When you see the 3A result shown in LCD screen, the adjustment process is finished. You can shut
off the electronic load and the parameters will be saved automatically.
10. Clean the data : Push the button until the parameters changed to next sets of parameters. Then release the button.
Then the next sets of parameters will be started and they will start from zero.
11. Over voltage or under voltage : Over voltage or under voltage, LCD screen displays a warning symbol and issue rapid beep beep sound.
12. Turn on mode l: The LCD screen will show all parameters within 1s when you connect power supply by Micro USB or male plug of USB with wire.(It is to check whether the LCD screen is good or not).Then you can see the parameters used last time(capacitor and which set of parameters). You also can see the current voltage, current and over voltage or under voltage. Please see following illustration.
USB output port can be connected to a data line, a discharge resistor or the like cable device comprising a data communication function, the data does not affect the data transmission line.
Test specifications, voltage can not exceed 30V, current can not exceed 5.1A.
Note:When the voltage is lower than 3V on the instrument display No display screen or higher than 22V,LCD screen displays a warning symbol and issue rapid beep beep sound, it does not affect the use.
Because mobile phones and digital devices at low battery or full charge, the current and voltage is not a stable value,
the application example of the discharge
device is a USB 1A or 2A discharge resistor.
Note: This data is mobile power discharge capacity, the battery capacity is not, according to our experience, the discharge capacity is about 1.9 times the battery capacity.
The former Test Reference Manual Tester discharge capacity value is cleared,and the mobile power is fully charged.
1 x LCD USB Voltage Current Detector Mobile Power USB Charger Tester Meter
0 out of 5 (0 Ratings)
5 Stars (0)
4 Stars (0)
3 Stars (0)
2 Stars (0)
1 Star (0)
|Shipping Company||Shipping Cost||Estimated Delivery Time|
|3 - 7 days|
|3 - 7 days|
|5 - 14 days|
|Post Air Mail||Free Shipping||15 - 45 days|
|Return Policy||If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
|Seller Service||On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).|
Most Popular from Category
1m 2m 3m 4m 5m 0.5m 2835 SMD Led Strip Light DC12V 60 Leds/M Fiexble Led Ribbon Tape LED Aquarium decoration
20pcs CBB 103 400V 103J 400V 0.01uF 10nF P10 CBB22 Free Shipping
2017 new high quality ! best price for hot air welding gun , heat air gun ,1550W plastic welder gun 230v 50/60hz fast shipping
US $150.00 / piece
SESOO EU/UK Standard Touch Switch 3 Gang 1 Way Wall Light Touch Switch-Crystal Glass Switch Panel
US $16.86 / piece
Wireless wired IP camera module HD 720P 960P 1080P support motion detector onvif P2P SD card slot Max32G for CCTV security cam
Free shipping LED DMX512 Computer PC Stage Lighting Controller Dimmer USB to DMX Interface Adapter With CD
US $17.96 / piece
online shopping, buying directly from manufacturers?
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.